德国aircom详细说明
描述:
A piezo-resistive pressure sensor converts the input pressure
into a digital electrical signal.
Medium: compressed air or non-corrosive gases
Overpressure: see chart
Voltage_supply: 15...30 V DC standard, optionally 230 V AC,
with reverse voltage protection
Electrical_connector: 7-pin connector,
16-pin connector for additional 4...20 mA output signal
Pneumatic_connection:
P+: pos. pressure
P-: vacuum
P+/P-: differential pressure, the higher pressure is to be connected
at P+ quick connector ports Ø 4 mm at the back
Display: 31/2-digit LCD display, max. ± 1999,
12.7 mm tall, black numbers
Output_signal: 0…10 V, optionally 4...20 mA, impedance < 500 Ω
Linearity/Hysteresis: < 1% FS, optionally < 0.5% FS
Long-term_stability:
< 0.5% FS per year at < 10 mbar,
< 0.1% FS per year at > 25 mbar
Temperature_sensitivity: see chart, at 0 to 50 °C / 32 to 122 °F
Repeatability: see chart
Response_time: < 1 ms for 10...90% of pressure range
Protection:class: IP 20
Temperature_range:
0 °C to 70 °C / 32 °F to 158 °F at < 10 mbar,
-25 °C to 85 °C / -13 °F to 185 °F at > 25 mbar,
0 °C to 50 °C / 32 °F to 122 °F compensated pressure range
Housing: glass fibre-reinforced Noryl plastic
德国aircom型号大全
AIRCOM RD
MHA-A5P压力表
AirCom 10232BPHX63
特价供应 AirCom 调压阀 D4V-C3
AirCom F465-06EL
AIRCOM RH
AIRCOM R03-J
AirCom 压力调节阀附件 MA6302-02
AirCom R 03-03-J6
F465-06EL过滤器
AirCom 过滤器 F465-06EL
MHA-A5P压力变送器
AirCom PRA32-0600
R280-08D Spare parts package备件包
AIRCOM PQ1/2
MHA-A5P风压表
MHA-A2P压力表
AIRCOM R217
AirCom 减压阀 R039-01CF
AirCom F465-06EL
德国aircom品牌介绍
德国AirCom公司压力变送器工作原理：当压力直接作用在测量膜片的表面，使膜片产生微小的形变，测量膜片上的高精度电路将这个微小的形变变换成为与压力成正比的高度线性、与激励电压也成正比的电压信号，然后采用专用芯片将这个电压信号转换为工业标准的4-2OmA电流信号或者1-5V电压信号。由于测量膜片采用标准话集成电路，内部包含线性及温度补偿电路，所以可以做到高精度和高稳定性，变送电路采用专用的两线制芯片，可以保证输出两线制4-2OmA电流信号。德国AIRCOM压力变送器主要性能：1、使用被测介质广泛，可测油、水及与316不锈钢和304不锈钢兼容的糊状物，具有 定的防腐能力；2、高准确度、高稳定性、选用进口原装传感器，线性好，温度稳定性高；3、体积小、重量轻、安装、调试、使用方便；4、不锈钢全封闭外壳，防水好；5、压力传感器直接感测被测液位压力，不受介质起泡、沉积的影响。
描述:
A piezo-resistive pressure sensor converts the input pressure
into a digital electrical signal.
Medium: compressed air or non-corrosive gases
Overpressure: see chart
Voltage_supply: 15...30 V DC standard, optionally 230 V AC,
with reverse voltage protection
Electrical_connector: 7-pin connector,
16-pin connector for additional 4...20 mA output signal
Pneumatic_connection:
P+: pos. pressure
P-: vacuum
P+/P-: differential pressure, the higher pressure is to be connected
at P+ quick connector ports Ø 4 mm at the back
Display: 31/2-digit LCD display, max. ± 1999,
12.7 mm tall, black numbers
Output_signal: 0…10 V, optionally 4...20 mA, impedance < 500 Ω
Linearity/Hysteresis: < 1% FS, optionally < 0.5% FS
Long-term_stability:
< 0.5% FS per year at < 10 mbar,
< 0.1% FS per year at > 25 mbar
Temperature_sensitivity: see chart, at 0 to 50 °C / 32 to 122 °F
Repeatability: see chart
Response_time: < 1 ms for 10...90% of pressure range
Protection:class: IP 20
Temperature_range:
0 °C to 70 °C / 32 °F to 158 °F at < 10 mbar,
-25 °C to 85 °C / -13 °F to 185 °F at > 25 mbar,
0 °C to 50 °C / 32 °F to 122 °F compensated pressure range
Housing: glass fibre-reinforced Noryl plastic
德国aircom型号大全
AIRCOM RD
MHA-A5P压力表
AirCom 10232BPHX63
特价供应 AirCom 调压阀 D4V-C3
AirCom F465-06EL
AIRCOM RH
AIRCOM R03-J
AirCom 压力调节阀附件 MA6302-02
AirCom R 03-03-J6
F465-06EL过滤器
AirCom 过滤器 F465-06EL
MHA-A5P压力变送器
AirCom PRA32-0600
R280-08D Spare parts package备件包
AIRCOM PQ1/2
MHA-A5P风压表
MHA-A2P压力表
AIRCOM R217
AirCom 减压阀 R039-01CF
AirCom F465-06EL
德国aircom品牌介绍
德国AirCom公司压力变送器工作原理：当压力直接作用在测量膜片的表面，使膜片产生微小的形变，测量膜片上的高精度电路将这个微小的形变变换成为与压力成正比的高度线性、与激励电压也成正比的电压信号，然后采用专用芯片将这个电压信号转换为工业标准的4-2OmA电流信号或者1-5V电压信号。由于测量膜片采用标准话集成电路，内部包含线性及温度补偿电路，所以可以做到高精度和高稳定性，变送电路采用专用的两线制芯片，可以保证输出两线制4-2OmA电流信号。德国AIRCOM压力变送器主要性能：1、使用被测介质广泛，可测油、水及与316不锈钢和304不锈钢兼容的糊状物，具有 定的防腐能力；2、高准确度、高稳定性、选用进口原装传感器，线性好，温度稳定性高；3、体积小、重量轻、安装、调试、使用方便；4、不锈钢全封闭外壳，防水好；5、压力传感器直接感测被测液位压力，不受介质起泡、沉积的影响。
QQ：1325426082广告业务:
