德国aircom详细说明
描述:
The volume booster with transmission ratio amplifies the outlet
pressure at a 1 to 1 up to 1 to 6 ratio by a pneumatic pilot
pressure, which has no constant bleed. That signal pressure
has the same function as a spring in a common regulator.
Generating counter pressure on the diaphragm. This force is
compensated by the outlet pressure on the diaphragm's bottom side.
The ratio of pilot pressure to outlet pressure depends on the size
of the operating diaphragms.
Media: compressed air or non-corrosive gases
Supply_pressure: max. 17 bar
Pilot_pressure:
. max. 10 bar at 1 to 1 ratio,
. 5 bar at 1 to 2,
. 3.3 bar at 1 to 3,
. 1.7 bar at 1 to 6
Pilot_port: G1/4
Accuracy:
at supply variation of 3.5 bar =
< 70 mbar at 1 to 1, < 140 mbar at 1 to 2,
< 270 mbar at 1 to 3,< 400 mbar at 1 to 6
Response_sensitivity:
< 2 mbar at 1 to 1, < 3 mbar at 1 to 2,
< 17 mbar at 1 to 3,< 23 mbar at 1 to 6
Air_consumption: max. 3 l/min, subject to outlet pressure
Relieving_function: relieving
Relief_capacity: 170 l/min at 1.5 bar outlet and 0.7 bar overpressure above setpoint
Gauge_port: on both sides of the body, thread equal to regulator thread
Mounting_position: any
Temperature_range:
0 °C to 70 °C / 32 °F to 158 °F, for appropriately conditioned compressed air down to -40 °C / -40 °F
Body: zinc die-cast
Elastomer: NBR/Buna-N
Inner_valve: brass and stainless steel
德国aircom型号大全
R160-04B13稳压阀
R038-01DK阀门
R13-02EV减压阀
特价供应 AirCom 调压阀 QD25-08NL
MHA-A5P压力表
R160-04B03阀门
特价供应 AirCom 调压阀 RGB4-08A
AIRCOM R400
MHA-A2P风压仪
AIRCOM R230
压差 Differential Pressure
AirCom F465-06EL
MA6302-02表头
AirCom 减压阀 R280-08EG G1 0.5-25bar
R160-04B阀门
AirCom 稳压阀 R160-04B15
AirCom 压力表 MHA-A2P
AirCom 过滤器 F465-06EL
AirCom R280-08EG G1`` 0.5-25bar
B11-02WJC空气过滤减压阀
德国aircom品牌介绍
德国AirCom公司压力变送器是指以输出为标准信号的压力传感器，是 种接受压力变量按比例转换为标准输出信号的仪表。它能将测压元件传感器感受到的气体、液体等物理压力参数转变成标准的电信号（如4~20mADC等），以供给指示报警仪、记录仪、调节器等二次仪表进行测量、指示和过程调节。压力变送器是工业实践中 为常用的 种传感器，其广泛应压力变送器用于各种工业自控环境，涉及水利水电、铁路交通、智能建筑、生产自控、航空航天、军工、石化、油井、电力、船舶、机床、管道等众多行业。下面就简单介绍 些常用压力变送器的原理及其应用、压力变送器是用于测量液体、气体或蒸汽的液位、密度和压力，然后将压力信号转变成4～20mADC信号输出。压力变送器主要有电容式压力变送器和扩散硅压力变送器，陶瓷压力变送器，应变式压力变送器等。压力变送器根据测压范围可分成 般压力变送器（0.001MPa～35MPa）和微差压变送器（0～1.5kPa），负压变送器三种。
描述:
The volume booster with transmission ratio amplifies the outlet
pressure at a 1 to 1 up to 1 to 6 ratio by a pneumatic pilot
pressure, which has no constant bleed. That signal pressure
has the same function as a spring in a common regulator.
Generating counter pressure on the diaphragm. This force is
compensated by the outlet pressure on the diaphragm's bottom side.
The ratio of pilot pressure to outlet pressure depends on the size
of the operating diaphragms.
Media: compressed air or non-corrosive gases
Supply_pressure: max. 17 bar
Pilot_pressure:
. max. 10 bar at 1 to 1 ratio,
. 5 bar at 1 to 2,
. 3.3 bar at 1 to 3,
. 1.7 bar at 1 to 6
Pilot_port: G1/4
Accuracy:
at supply variation of 3.5 bar =
< 70 mbar at 1 to 1, < 140 mbar at 1 to 2,
< 270 mbar at 1 to 3,< 400 mbar at 1 to 6
Response_sensitivity:
< 2 mbar at 1 to 1, < 3 mbar at 1 to 2,
< 17 mbar at 1 to 3,< 23 mbar at 1 to 6
Air_consumption: max. 3 l/min, subject to outlet pressure
Relieving_function: relieving
Relief_capacity: 170 l/min at 1.5 bar outlet and 0.7 bar overpressure above setpoint
Gauge_port: on both sides of the body, thread equal to regulator thread
Mounting_position: any
Temperature_range:
0 °C to 70 °C / 32 °F to 158 °F, for appropriately conditioned compressed air down to -40 °C / -40 °F
Body: zinc die-cast
Elastomer: NBR/Buna-N
Inner_valve: brass and stainless steel
德国aircom型号大全
R160-04B13稳压阀
R038-01DK阀门
R13-02EV减压阀
特价供应 AirCom 调压阀 QD25-08NL
MHA-A5P压力表
R160-04B03阀门
特价供应 AirCom 调压阀 RGB4-08A
AIRCOM R400
MHA-A2P风压仪
AIRCOM R230
压差 Differential Pressure
AirCom F465-06EL
MA6302-02表头
AirCom 减压阀 R280-08EG G1 0.5-25bar
R160-04B阀门
AirCom 稳压阀 R160-04B15
AirCom 压力表 MHA-A2P
AirCom 过滤器 F465-06EL
AirCom R280-08EG G1`` 0.5-25bar
B11-02WJC空气过滤减压阀
德国aircom品牌介绍
德国AirCom公司压力变送器是指以输出为标准信号的压力传感器，是 种接受压力变量按比例转换为标准输出信号的仪表。它能将测压元件传感器感受到的气体、液体等物理压力参数转变成标准的电信号（如4~20mADC等），以供给指示报警仪、记录仪、调节器等二次仪表进行测量、指示和过程调节。压力变送器是工业实践中 为常用的 种传感器，其广泛应压力变送器用于各种工业自控环境，涉及水利水电、铁路交通、智能建筑、生产自控、航空航天、军工、石化、油井、电力、船舶、机床、管道等众多行业。下面就简单介绍 些常用压力变送器的原理及其应用、压力变送器是用于测量液体、气体或蒸汽的液位、密度和压力，然后将压力信号转变成4～20mADC信号输出。压力变送器主要有电容式压力变送器和扩散硅压力变送器，陶瓷压力变送器，应变式压力变送器等。压力变送器根据测压范围可分成 般压力变送器（0.001MPa～35MPa）和微差压变送器（0～1.5kPa），负压变送器三种。
QQ：1325426082广告业务:
