德国aircom详细说明
描述:
Signal-operated regulator designed to provide outlet pressure
which is the sum of the input signal pressure plus a preset bias.
As an option, the relay can start with bias range -0.3 bar / -4 psi.
The relay can also be used as a differential pressure regulator.
Media: compressed air or non-corrosive gases
Supply_pressure: max. 17 bar
Pilot_pressure: max. 10 bar, pilot port G1/4
Accuracy: response sensitivity < 1 mbar
Air_consumption: without constant bleed
Relieving_function: relieving
Relief_capacity: 110 l/min at 1.5 bar outlet and 0.35 bar overpressure above setpoint
Gauge_port: G1/4 on both sides of the body, screw plugs supplied
Mounting_position: any
Temperature_range:
0 °C to 90 °C / 32 °F to 194 °F,
for appropriately conditioned compressed air down to -40 °C / -40 °F
Body: aluminium die-cast
Elastomer: NBR/Buna-N
Inner_valve: brass
德国aircom型号大全
AirCom 减压阀 R160-04C15
AIRCOM RC
AirCom MA6302-02
AirCom F465-06EL
AirCom 阀门 R038-01CK
AirCom F465-06EL
AirCom F465-06EL
PDA83-062比例阀
134-02-50T（0-3.5bar）压力调节器
AirCom 压力调节阀 R45-02CK
F400过滤器
气缸型Cylinder
AIRCOM R23-W
AirCom 10212H
R160-08C15_01减压阀
MA6302-02压力调节阀附件
PDA42-100减压阀
RGB4-08A减压阀
R160-04B调压阀
AirCom PRA00-0200
德国aircom品牌介绍
德国AirCom公司压力变送器工作原理：当压力直接作用在测量膜片的表面，使膜片产生微小的形变，测量膜片上的高精度电路将这个微小的形变变换成为与压力成正比的高度线性、与激励电压也成正比的电压信号，然后采用专用芯片将这个电压信号转换为工业标准的4-2OmA电流信号或者1-5V电压信号。由于测量膜片采用标准话集成电路，内部包含线性及温度补偿电路，所以可以做到高精度和高稳定性，变送电路采用专用的两线制芯片，可以保证输出两线制4-2OmA电流信号。德国AIRCOM压力变送器主要性能：1、使用被测介质广泛，可测油、水及与316不锈钢和304不锈钢兼容的糊状物，具有 定的防腐能力；2、高准确度、高稳定性、选用进口原装传感器，线性好，温度稳定性高；3、体积小、重量轻、安装、调试、使用方便；4、不锈钢全封闭外壳，防水好；5、压力传感器直接感测被测液位压力，不受介质起泡、沉积的影响。
描述:
Signal-operated regulator designed to provide outlet pressure
which is the sum of the input signal pressure plus a preset bias.
As an option, the relay can start with bias range -0.3 bar / -4 psi.
The relay can also be used as a differential pressure regulator.
Media: compressed air or non-corrosive gases
Supply_pressure: max. 17 bar
Pilot_pressure: max. 10 bar, pilot port G1/4
Accuracy: response sensitivity < 1 mbar
Air_consumption: without constant bleed
Relieving_function: relieving
Relief_capacity: 110 l/min at 1.5 bar outlet and 0.35 bar overpressure above setpoint
Gauge_port: G1/4 on both sides of the body, screw plugs supplied
Mounting_position: any
Temperature_range:
0 °C to 90 °C / 32 °F to 194 °F,
for appropriately conditioned compressed air down to -40 °C / -40 °F
Body: aluminium die-cast
Elastomer: NBR/Buna-N
Inner_valve: brass
德国aircom型号大全
AirCom 减压阀 R160-04C15
AIRCOM RC
AirCom MA6302-02
AirCom F465-06EL
AirCom 阀门 R038-01CK
AirCom F465-06EL
AirCom F465-06EL
PDA83-062比例阀
134-02-50T（0-3.5bar）压力调节器
AirCom 压力调节阀 R45-02CK
F400过滤器
气缸型Cylinder
AIRCOM R23-W
AirCom 10212H
R160-08C15_01减压阀
MA6302-02压力调节阀附件
PDA42-100减压阀
RGB4-08A减压阀
R160-04B调压阀
AirCom PRA00-0200
德国aircom品牌介绍
德国AirCom公司压力变送器工作原理：当压力直接作用在测量膜片的表面，使膜片产生微小的形变，测量膜片上的高精度电路将这个微小的形变变换成为与压力成正比的高度线性、与激励电压也成正比的电压信号，然后采用专用芯片将这个电压信号转换为工业标准的4-2OmA电流信号或者1-5V电压信号。由于测量膜片采用标准话集成电路，内部包含线性及温度补偿电路，所以可以做到高精度和高稳定性，变送电路采用专用的两线制芯片，可以保证输出两线制4-2OmA电流信号。德国AIRCOM压力变送器主要性能：1、使用被测介质广泛，可测油、水及与316不锈钢和304不锈钢兼容的糊状物，具有 定的防腐能力；2、高准确度、高稳定性、选用进口原装传感器，线性好，温度稳定性高；3、体积小、重量轻、安装、调试、使用方便；4、不锈钢全封闭外壳，防水好；5、压力传感器直接感测被测液位压力，不受介质起泡、沉积的影响。
QQ：1325426082广告业务:
