德国aircom详细说明
描述:
High pressure regulator for gas cylinders for reducing pressure
of compressed air or liquid gases from a high level, e.g. of
200 bar or 300 bar, to the required pressure.
Supply_pressure: max. 200 bar or max. 300 bar
Media: compressed air, oxygen or different gases
Connections: according to DIN 477
Adjustment: by T-handle
Gauge_port:
All regulators are equipped with both one supply pressure gauge
and one outlet pressure gauge.
Leakage_rate: 10-6 mbar l/s
Compensation:
All regulators are equipped with supply pressure variation
compensation, so that a change in supply pressure has no effect
on the outlet pressure's stability.
Temperature_range: -30 °C to 60 °C / -22 °F to 140 °F
Body: brass
O-rings: NBR/Buna-N and EPDM
Spring_cage: brass
Diaphragm: 65NBR4550, PTFE for outlet > 10 bar,
stainless steel for pure gases up to 5.0
德国aircom型号大全
MHA-A5P压力表
AirCom D8V-05
AirCom 调节阀附件 MA6302-02
AIRCOM R13
特价供应 AirCom 调压阀 R03-04D
AirCom R160-04B13-01
MHA-A5P压力表
AIRCOM 239
特价供应 AirCom 调压阀 KM12-A4-2
MHA-A5P压力变送器
53.4921.00压力变送器
AirCom R400-04D
特价供应 AirCom 调压阀 spare sleeve for QP25-08NL part no. QPM-25NL
RH10-A3D11流量计
MA6302-02压力调节阀附件
特价供应 AirCom 调压阀 PDA42-100
AirCom RGDJ-08H
AirCom F950-5-050-B80
特价供应 AirCom 调压阀 R102-12A
F35-01AH气体过滤器
德国aircom品牌介绍
德国AirCom公司压力变送器工作原理：当压力直接作用在测量膜片的表面，使膜片产生微小的形变，测量膜片上的高精度电路将这个微小的形变变换成为与压力成正比的高度线性、与激励电压也成正比的电压信号，然后采用专用芯片将这个电压信号转换为工业标准的4-2OmA电流信号或者1-5V电压信号。由于测量膜片采用标准话集成电路，内部包含线性及温度补偿电路，所以可以做到高精度和高稳定性，变送电路采用专用的两线制芯片，可以保证输出两线制4-2OmA电流信号。德国AIRCOM压力变送器主要性能：1、使用被测介质广泛，可测油、水及与316不锈钢和304不锈钢兼容的糊状物，具有 定的防腐能力；2、高准确度、高稳定性、选用进口原装传感器，线性好，温度稳定性高；3、体积小、重量轻、安装、调试、使用方便；4、不锈钢全封闭外壳，防水好；5、压力传感器直接感测被测液位压力，不受介质起泡、沉积的影响。
描述:
High pressure regulator for gas cylinders for reducing pressure
of compressed air or liquid gases from a high level, e.g. of
200 bar or 300 bar, to the required pressure.
Supply_pressure: max. 200 bar or max. 300 bar
Media: compressed air, oxygen or different gases
Connections: according to DIN 477
Adjustment: by T-handle
Gauge_port:
All regulators are equipped with both one supply pressure gauge
and one outlet pressure gauge.
Leakage_rate: 10-6 mbar l/s
Compensation:
All regulators are equipped with supply pressure variation
compensation, so that a change in supply pressure has no effect
on the outlet pressure's stability.
Temperature_range: -30 °C to 60 °C / -22 °F to 140 °F
Body: brass
O-rings: NBR/Buna-N and EPDM
Spring_cage: brass
Diaphragm: 65NBR4550, PTFE for outlet > 10 bar,
stainless steel for pure gases up to 5.0
德国aircom型号大全
MHA-A5P压力表
AirCom D8V-05
AirCom 调节阀附件 MA6302-02
AIRCOM R13
特价供应 AirCom 调压阀 R03-04D
AirCom R160-04B13-01
MHA-A5P压力表
AIRCOM 239
特价供应 AirCom 调压阀 KM12-A4-2
MHA-A5P压力变送器
53.4921.00压力变送器
AirCom R400-04D
特价供应 AirCom 调压阀 spare sleeve for QP25-08NL part no. QPM-25NL
RH10-A3D11流量计
MA6302-02压力调节阀附件
特价供应 AirCom 调压阀 PDA42-100
AirCom RGDJ-08H
AirCom F950-5-050-B80
特价供应 AirCom 调压阀 R102-12A
F35-01AH气体过滤器
德国aircom品牌介绍
德国AirCom公司压力变送器工作原理：当压力直接作用在测量膜片的表面，使膜片产生微小的形变，测量膜片上的高精度电路将这个微小的形变变换成为与压力成正比的高度线性、与激励电压也成正比的电压信号，然后采用专用芯片将这个电压信号转换为工业标准的4-2OmA电流信号或者1-5V电压信号。由于测量膜片采用标准话集成电路，内部包含线性及温度补偿电路，所以可以做到高精度和高稳定性，变送电路采用专用的两线制芯片，可以保证输出两线制4-2OmA电流信号。德国AIRCOM压力变送器主要性能：1、使用被测介质广泛，可测油、水及与316不锈钢和304不锈钢兼容的糊状物，具有 定的防腐能力；2、高准确度、高稳定性、选用进口原装传感器，线性好，温度稳定性高；3、体积小、重量轻、安装、调试、使用方便；4、不锈钢全封闭外壳，防水好；5、压力传感器直接感测被测液位压力，不受介质起泡、沉积的影响。
QQ：1325426082广告业务:
