德国aircom详细说明
描述:
In-Line pressure regulator with factory-set outlet pressure, reducing from e.g. 10 bar to 5 bar.
The regulator R13 is suited for basic pressure control only with an outlet pressure tolerance of ±30%.
The outlet pressure stated below is valid for 12 bar inlet pressure. For other inlet pressure please
refer to the according item from the diagram.
Benefits:
• Higher safety through lower pressure. Tools and equipment protected against pressure damages.
• Cost reduction through substantially reduced air consumption. Longer service life.
• Noise reduction for tools.
Media: compressed air or non-corrosive gases
Supply_pressure: max. 15 bar
Adjustment:
Select the pressure regulator according to the desired outlet pressure. The outlet pressure cannot be
subsequently adjusted. This safeguards against tampering.
Relieving_function: non-relieving, therefore not recommended for applications such as nailers
Temperature_range:
0 °C to 60 °C / 32 °F to 140 °F, for appropriately conditioned compressed air down to -30 °C / -22 °F
Body: brass
Elastomer: NBR/Buna-N, optionally FKM
德国aircom型号大全
AirCom 过滤器 F465-06EL
AirCom 压力表 MHA-A5P
R10-04C流量计
R119-06J气动阀节
AIRCOM R10-S
R03-04J6减压阀
AirCom VR6-04A.
AirCom 过滤器 F465-06EL
AirCom R120 -02G
AirCom F465-06EL
R13-02EV流量计
R280-06DG G3/4`` 0.5-16bar减压阀
RGB4-08A减压阀
AIRCOM R280
AirCom F465-06EL
MHA-A5P压力表
R160-08B13_01减压阀
FM-03_02过滤器
MHA-A5P压力表
AirCom MHA-A5P
德国aircom品牌介绍
德国AirCom公司产品介绍：调压阀，适用于气体、液体和蒸汽;手动、机械、气动、电动控制;高精度、低成本、超长使用寿命;调节范围从2mbar到700bar及真空;适合高/低流速;黄铜、锌、铝、塑料、不锈钢材质。流量控制器，适用于气体、液体，也可作测量设备;手动或电动控制;调节范围从5ml/min至7500l/min;铝、黄铜、不锈钢材质。测量设备，压力变送器，适合高温环境使用，精度0.1%;压力开关，压力范围从3 mbar 至200 bar，带气口。流量计，测量范围从5ml/min至7500l/min;压力表，带模拟/数字显示其它产品，过滤器、不锈钢增压阀、背压调节阀;夹管阀;针阀。德国AirCom公司成立于1986年，主要生产压力和流量的控制、测量设备、FRL产品和快速启动螺线管电磁阀。在压力和流量调节方面，AirCom始终处于领导地位。德国AirCom公司的仪器设备广泛应用于工业的许多领域。主要产品有：各种高压、低压、精密等气液调压阀、比例阀，压力开关，压力变送器、压力表等.AirCom在气动领域 直是 个可靠的合作伙伴。另外在压缩空气的压力控制和流量控制领域的专长为气态和液态介质纯化。以保护和安全性为使命的各种阀和压力调节器，用于许多领域的行业——从工程、医疗、化工到医药等行业的测试和实验室设备中。
描述:
In-Line pressure regulator with factory-set outlet pressure, reducing from e.g. 10 bar to 5 bar.
The regulator R13 is suited for basic pressure control only with an outlet pressure tolerance of ±30%.
The outlet pressure stated below is valid for 12 bar inlet pressure. For other inlet pressure please
refer to the according item from the diagram.
Benefits:
• Higher safety through lower pressure. Tools and equipment protected against pressure damages.
• Cost reduction through substantially reduced air consumption. Longer service life.
• Noise reduction for tools.
Media: compressed air or non-corrosive gases
Supply_pressure: max. 15 bar
Adjustment:
Select the pressure regulator according to the desired outlet pressure. The outlet pressure cannot be
subsequently adjusted. This safeguards against tampering.
Relieving_function: non-relieving, therefore not recommended for applications such as nailers
Temperature_range:
0 °C to 60 °C / 32 °F to 140 °F, for appropriately conditioned compressed air down to -30 °C / -22 °F
Body: brass
Elastomer: NBR/Buna-N, optionally FKM
德国aircom型号大全
AirCom 过滤器 F465-06EL
AirCom 压力表 MHA-A5P
R10-04C流量计
R119-06J气动阀节
AIRCOM R10-S
R03-04J6减压阀
AirCom VR6-04A.
AirCom 过滤器 F465-06EL
AirCom R120 -02G
AirCom F465-06EL
R13-02EV流量计
R280-06DG G3/4`` 0.5-16bar减压阀
RGB4-08A减压阀
AIRCOM R280
AirCom F465-06EL
MHA-A5P压力表
R160-08B13_01减压阀
FM-03_02过滤器
MHA-A5P压力表
AirCom MHA-A5P
德国aircom品牌介绍
德国AirCom公司产品介绍：调压阀，适用于气体、液体和蒸汽;手动、机械、气动、电动控制;高精度、低成本、超长使用寿命;调节范围从2mbar到700bar及真空;适合高/低流速;黄铜、锌、铝、塑料、不锈钢材质。流量控制器，适用于气体、液体，也可作测量设备;手动或电动控制;调节范围从5ml/min至7500l/min;铝、黄铜、不锈钢材质。测量设备，压力变送器，适合高温环境使用，精度0.1%;压力开关，压力范围从3 mbar 至200 bar，带气口。流量计，测量范围从5ml/min至7500l/min;压力表，带模拟/数字显示其它产品，过滤器、不锈钢增压阀、背压调节阀;夹管阀;针阀。德国AirCom公司成立于1986年，主要生产压力和流量的控制、测量设备、FRL产品和快速启动螺线管电磁阀。在压力和流量调节方面，AirCom始终处于领导地位。德国AirCom公司的仪器设备广泛应用于工业的许多领域。主要产品有：各种高压、低压、精密等气液调压阀、比例阀，压力开关，压力变送器、压力表等.AirCom在气动领域 直是 个可靠的合作伙伴。另外在压缩空气的压力控制和流量控制领域的专长为气态和液态介质纯化。以保护和安全性为使命的各种阀和压力调节器，用于许多领域的行业——从工程、医疗、化工到医药等行业的测试和实验室设备中。
QQ：1325426082广告业务:
